Studs
I got some studs today (yay) and i had a fuckload of trouble getting them in, the legs of the stud are too thick to bend with a pair of pliers! tips?
Views: 11
Replies to This Discussion
-
Permalink Reply by Protagonist on
-
yeah, well I use a screw driver to bend em. then like put it flat then use your thumb, idk thats probably not explaining it very well. aaand if you can't bend them with pliers the screwdriver thing probably won't help you.
Hammers might. Try hammers.
-
Permalink Reply by Khaos on
-
all we use are a flathead screwdriver and lots of elbow grease here! haha
I know what you meant, probably cause I do it the same way.
-
Permalink Reply by Segadoway on
-
But first we eat powdered concrete to prepare, or we just take a bite out of the curb TRU PUNX
-
Permalink Reply by ┌x┐ • •┌x┐Pots Pots Pots on
-
Yeah, that was pretty cute.
-
-
Yeah guys i don't think you realise how hard it is to bend these studs lol, i used a screwdriver, a hammer and a big chunk of metal, and it is still hard!
-
-
or you'll just heat it up to the point where you can burn yourself and still unbent, due to the excessive heat.
gloves would make it harder to handle the studs.
I had to do this with pistons... it was not fun.
About
Latest Activity
© 2024 Created by Giant Mohawk Man.
Powered by
